HG Associates Inc Block  
                Admin
 
corner
  corner    

HG Associates Inc.
610-495-6674

 

 

 
   
   

 

New CNC lightening programs - lower prices

HG Associates of Limerick PA invites you to lighten up your engine for next season. Rebuild season is an excellent time to take extra pounds off your engine and the front of your race car. Gain that extra rear weight percentage so beneficial to better handling and forward bite!

Whether you use HG for your rebuild or your own builder HG will work with him and use our CNC block lightening process to literally "shave" up to 45 pounds from your engine at prices ranging from $395 to $1095 depending on your application.

Inside of the block water passages are digitized and committed to computer memory. This data is used to generate the desired surfaces of the outside of the finished, lightened block. The program used can be adjusted for the amount removed easily. This method gives consistent thicknesses throughout the lightened areas and maximum weight reduction. (i.e Iron is not too thick in one place and too thin in another, it's a uniform thickness all over). Others doing this are either very expensive or have a very simple program that doesn't take off as much weight as is possible. Note: We cannot be responsible for blocks with shifted internal cores and the subsequent problems.

  last updated - 5/28/2014
______________________________________________________________________________
 

-Hoseheads
-


Engine Rebuilds get a special discount on Dyno time. Ask for details


  home